Free inspection
Two-story home with stacked stone and shake siding under a brown shingle roof
The house sets the price, not a per-square average

New Roof Cost in Edmond, OK

New roof cost in Edmond, OK follows the specific house, its pitch, planes, and access, plus the shingle grade that matches it. Honest ranges below, each set firm once a roofer measures the roof.

  • The full price on paper, up front
  • Repairs timed to your calendar
  • A fair repair-or-replace call
Price my Edmond roofNew file · today

By submitting, you agree that we and an independent local roofing contractor may call, text, or email you about your roofing project at the number and email you provide, including by automated means. Consent is not a condition of purchase. Message and data rates may apply; reply STOP to opt out.

Priced to the house in front of you

What sets a new roof cost in Edmond

Edmond runs a wide range of homes. A new roof cost here does not start with a per-square average. The number starts with the specific house: its pitch, how many planes and valleys it carries, how easy it is to reach, and the shingle grade that matches the home.

A local roofer scopes the actual roof, plane by plane, before a number, so the price fits the roof you own. Each range here is a planning figure that lands firm in a written estimate, whether you match your asphalt or step up to a designer material.

Single-story home with brown shingle roof and decorative gable trim
The local file

Roof replacement pricing for an Edmond home, by material

Ranges by material, before the house is measured

These are fair per-square ranges for a full replacement on a typical Edmond home, by the shingle or metal you choose. Where your roof lands inside them turns on the specific house: its pitch, how many planes and valleys it carries, and how hard it is to reach.

Architectural asphalt roofFull tear-off, dimensional shingle$9,600–$15,800
Impact-resistant shingleThe hail-rated grade for storm country$11,800–$18,000
Designer / premium shingleSlate or shake-style premium tier$12,700–$22,300
Standing-seam metalConcealed-fastener panel system$19,200–$33,800

Planning ranges for the Oklahoma City metro, built from regional labor costs, not a quote. Every roof is different.

The calculator

Rough out a number before our roofers measure

Enter the roof's rough size and a material grade for a ballpark. Read it as a planning figure, not a bill: the real number follows the specific house, its pitch, planes, and access, once a roofer measures it.

$ Estimate
SQ FT
Estimated install range
$11,210 – $13,410
Adjusted area (pitch)2,300 sq ft
Rate basis (incl. tear-off)$5.30 / sq ft

An Edmond-area planning figure, not a quote. The real number follows the specific house, its pitch, planes, access, and the material grade that matches it, and a local roofer confirms it in writing after getting on the roof.

Turn this into a written price
Why it matters

Why two Edmond roofs the same size price apart

Square footage only sets the floor. The specific house, its pitch, its planes, its access, and the material grade it calls for, sets where your number lands.

What a roofer measuresA simpler Edmond roofA steep, cut-up Edmond roof
Pitch and footingLow enough to walk, quicker and saferSteep, so slower going and more fall gear
Planes, valleys, and dormersA clean gable, little hand-cut flashingMany planes and valleys, each hand-flashed
Access around the houseOpen drive, easy staging and haul-offA tight or gated lot, more staging and time
The material grade it calls forArchitectural asphalt does the jobDesigner or metal to match the home
Where the number landsToward the low end of the rangeToward the high end, for real reasons

None of it reads from the driveway. A local roofer measures every plane and reads the deck, then writes the number your specific Edmond roof calls for, not a per-square guess.

Questions

What Edmond homeowners ask about roof cost

Clear answers to what comes up first when an Edmond roof needs replacing.

Q1How much does a new roof cost in Edmond, OK?
There is no single average, because the number follows the actual roof. As a planning start, the ranges for a typical mid-size roof of about 24 squares (100 square feet each), from standard architectural asphalt up through impact-rated Class 4, a designer shingle, and standing-seam metal, are spelled out in the table on this page. Where your own roof falls inside those turns on its pitch, planes, access, and the grade it calls for, so a roofer measures every plane and confirms one figure in writing.
Q2Two Edmond homes the same size got very different roof quotes. Why?
Square footage only sets the floor. A simple gable roof and one full of valleys, dormers, and a steep pitch are two different jobs at the same size, because every valley and dormer needs hand-cut flashing, a steep roof is slower and takes more fall gear, and a tight or gated lot adds staging time. Those are the real reasons two same-size Edmond roofs can differ by thousands, and a roofer can show you each one on your roof.
Q3Does a steep or cut-up roof really cost more to replace?
Yes, for reasons you can see once they are pointed out. A steep roof is slower and safer work, so it takes more labor and fall protection, and a steep slope carries more surface than a low one over the same footprint, so it uses more material. A cut-up roof, meaning lots of valleys, hips, dormers, and chimneys, means far more hand-fitted flashing at the spots most likely to leak. Both push the number up for real work, not padding.
Q4Does a large custom home cost more per square than a smaller older Edmond home?
A large home often does, for two reasons. A bigger house usually carries a bigger, more complex roof, with more planes, steeper pitches, and harder access, and those add labor to every square. Higher-end homes also more often call for a designer or metal grade that costs more than standard asphalt. A smaller older roof on a simple gable is often fine in architectural asphalt. Either way, a free roof inspection measures the actual roof before any number, because the price matches the specific house, not a city average.
Q5Can you give me a price without seeing the roof?
No, and that is the honest answer. Nothing that sets the number, the pitch, the planes and valleys, the access, or the deck hiding under the old shingles, reads from a description or the driveway. A local roofer gets on the roof, measures every plane, reads the deck once the old layers are off, and writes one scope for the grade you choose. You see the single figure as a written estimate, long before signing comes up.
Q6What surprise costs show up once a roofer is on the roof?
The common one is the decking, the wood sheathing under your shingles. If a section is soft or rotted, it has to be replaced before the new roof goes on, and that is not visible until the old layers come off. A good roofer flags it as a possible line item up front, shows you the damage before replacing it, and prices it plainly. If a storm is why you are re-roofing, the storm damage guide covers what a hail check looks for before any cost talk.
Price the actual roof

Get one written number for your Edmond roof

Turn the ranges above into your real number: give Edmond Roofing Co a few details about the house, and a local roofer measures every plane, reads the deck, and writes one firm figure for the roof you own.

Price my Edmond roofNew file · today

By submitting, you agree that we and an independent local roofing contractor may call, text, or email you about your roofing project at the number and email you provide, including by automated means. Consent is not a condition of purchase. Message and data rates may apply; reply STOP to opt out.

Free Estimate